BX-SRS-505 Electrical insulation silicone resin
This Electrical insulation silicone resin offers excellent heat resistance, moisture resistance, and electrical insulation properties. It is well-suited for use in H-grade glass fiber-covered wires, glass cloth impregnation, transistor protective coatings, and high-temperature resistant coatings.
Ⅰ. Product Details
| Item | Index |
| Appearance | Colorless to light yellow transparent liquid, opalescent light is allowed |
| Viscosity(4# Cup, 25℃), S | 20-50 |
| Solid content, % | 50±1 |
| Note: The above data are for reference only and are not guaranteed technical specifications. *Supplementary Explanations: 1. “Opalescent light is allowed” refers to a faint iridescent or milky luster that may appear in the liquid—this is a normal and acceptable trait in modified resin systems (e.g., silicone-modified acrylic or epoxy resins), caused by subtle light scattering of resin molecules, and does not indicate impurities or quality issues; 2. Viscosity (20-50S via 4# Cup at 25℃) belongs to medium-to-high viscosity: this range balances two key needs—on one hand, it ensures sufficient fluidity for application methods like brushing, rolling, or low-pressure spraying; on the other hand, it avoids excessive run-off when coating vertical substrates, helping form uniform wet films; 3. “Solid content 50±1%” means non-volatile components (resin, functional additives, etc.) account for half the total mass: this ratio reduces volatile organic compound (VOC) emissions compared to low-solid-content products, while ensuring the cured film has enough thickness and performance (e.g., adhesion, wear resistance) without requiring multiple coats; 4. The combination of these indicators suggests the product is likely a solvent-based functional resin (e.g., for coatings, adhesives) suitable for scenarios requiring moderate application viscosity and balanced environmental performance. | |
Ⅱ. Packaging and Storage
This product is packed in 200 kg iron drum, stored in a cool and dry place, avoid direct sunlight, avoid acid and alkali contact. Storied and transported as dangerous goods.
Ⅲ. Instructions
1.The diluent used in this product should not contain water, acid, alkali, amine and other compounds, otherwise it will affect adhesion, dryness and other properties of paint film.
2.This product contains toluene and other flammable and explosive solvents. Attention should be paid to enhancing site ventilation during processing. Pay attention to fire prevention, anti-static, strictly cut off fire sources. Operators should pay attention to labor protection.
3.This product can be diluted with ketones, esters, toluene, xylene, etc.. The shelf life is half a year.