BX-SRA-901 Solvent-free silicone release agent
This product is an addition-curing, solvent-free silicone release agent. It cures rapidly. It offers low release force at slow peel speeds and medium release force at high speeds. The release force remains stable. It provides strong adhesion and excellent bath stability. It is mainly used for coating paper, labels, adhesive protection and other substrates.
Ⅰ. Product Details
| Typical product characteristics | Numeric value |
| Appearance | Colorless |
| Active ingredient content, % | 100 |
| Viscosity(mPa.s @23°C) | 280-350 mPa.s |
| Density(25 °C) | 0.97 g/cm³ |
| Flash point(℃ ,closed Cup) | 140 |
| Note: The above data are typical values and for reference only, not guaranteed technical specifications. Actual product performance may vary slightly depending on production batches and testing conditions. | |
Ⅱ. Packaging and Storage
The product should be stored in its original airtight container at -20℃ to +30℃. The expiration date (used before “month-year” is clearly indicated on the label of each barrel. The fact that the storage period exceeds the best period indicated on the label does not mean that the product is no longer usable. But in this case, in order to guarantee the quality of the product, it is necessary to re-check the relevant properties of the Product.
Ⅳ. Usage Reference
The coating solution must be prepared in the following order: 1. Add high-peeling strength additives first in high-peeling force application;
2. Add BX-SRA-901 and stir slowly until the mixture is homogeneous;
3. Add cross-linking agent and stir evenly;
4. Finally, add catalyst slowly and stir evenly;
5. The filtered coating solution is evenly coated on the substrate by a suitable coating head, and then enters the oven for solidification, the oven temperature is set to 120~160℃, and the oven residence time is a few seconds to tens of seconds.