# boxinmaterial.com > Creating Green Chemistry, Innovating Everyday Life ## Posts - [Silicone Resin for Impregnating Varnish — Key Raw Material for Glass Cloth and Sleeving Insulation ](https://boxinmaterial.com/silicone-resin-for-impregnating-varnish-key-raw-material-for-glass-cloth-and-sleeving-insulation/): Silicone Resin for Impregnating Varnish Manufacturers Silicone resins are critical raw materials for […] - [Mica Bonding Varnish: The Role of Silicone Adhesives in Electrical Insulation](https://boxinmaterial.com/mica-bonding-varnish-the-role-of-silicone-adhesives-in-electrical-insulation/): Silicone-based mica bonding varnish mainly bonds various heat-resistant insulating materials. These […] - [Coil Impregnation Varnish: Applications and the Role of Silicone Resins](https://boxinmaterial.com/coil-impregnation-varnish/): Coil impregnation varnish is a type of silicone insulating varnish. It is mainly used for impregnati […] - [Application of organic silicone adhesive in mica tape](https://boxinmaterial.com/application-of-organic-silicone-adhesive-in-mica-tape/): 1.What is refractory mica tape? Fire-resistant mica tape is a high-temperature insulation material c […] ## Pages - [Privacy Policy](https://boxinmaterial.com/privacy-policy/): BOXIN MATERIAL values the privacy of all visitors and customers. This Privacy Policy explains how we […] - [Information](https://boxinmaterial.com/information/): Coatings and Adhesives Electrical and Electronics Construction and Sealants Personal Care Industry P […] - [Contact Us](https://boxinmaterial.com/contact-us/): contact us CONTACT PERSON Export Department Manager Name: David Xu Email: david@boxinmaterial.com Ge […] - [About Us](https://boxinmaterial.com/about-us/): About us Boxin Technology Co., Ltd. is a professional chemical exporter in Quzhou, Zhejiang.The comp […] - [Home](https://boxinmaterial.com/): Global Supplier of Silicone Resins High-performance solutions for adhesives, coatings, electronics, […] ## Products - [BX-SOS-002 Dimethyl Silicone Oil](https://boxinmaterial.com/product/bx-sos-002-dimethyl-silicone-oil/): Ⅰ. Product Details Model Appearance Viscosity (mPa.s,25℃) Refractive Index 25℃ Flash Point (open cup,℃) 100 Colorless transparent oily liquid 100±5 1.4020-1.4040 ≥310 350 Colorless transparent oily liquid 350±20 1.4020-1.4040 ≥315 500 Colorless transparent oily liquid 500±25 1.4020-1.4040 ≥315 1000 Colorless transparent oily liquid 1000±50 1.4025-1.4045 ≥320 2000 Colorless transparent oily liquid 2000±100 1.4025-1.4045 ≥320 5000 Colorless transparent oily liquid 5000±255 1.4025-1.4045 ≥320 10000 Colorless transparent oily liquid 10000±500 1.4025-1.4045 ≥330 Note: The above data are typical values for reference only. Actual product performance may vary slightly depending on production batches and testing conditions. All tests are conducted under standard laboratory environment (25℃±2℃, 55%±5%RH). The flash point is tested by open cup method, which is for reference in safe storage and transportation. Ⅱ. Packaging and Storage The product should be packed in clean plastic drum. It should be stored in dry and ventilated place, away from fire and direct sunlight. The product should be transported as non-dangerous material. Valid storage period of one year. - [BX-SRA-902 Solvent-based silicone release agent](https://boxinmaterial.com/product/bx-sra-902-silicone-release-agent/): Ⅰ. Product Details Typical product characteristics Numeric value / Attribute Appearance Colorless Active ingredient content, % 30 Viscosity(mPa.s @23°C) 16000-2000 mPa.s Diluent Toluene Flash point(℃, closed Cup) 5 Note: 1. The above data are typical values for reference only, not guaranteed technical specifications; actual performance may vary slightly by production batch. 2. Attention: The product contains toluene as a diluent and has a low closed-cup flash point (5℃), so it should be stored and used in a well-ventilated environment, away from open flames and high-temperature sources to avoid fire or explosion risks. 3. It is recommended to confirm the latest product specification sheet before use for accurate parameter guidance. Ⅱ. Packaging and Storage The product should be stored in its original airtight container at -20℃ to +30℃. The expiration date (used before "month-year" is clearly indicated on the label of each barrel. The fact that the storage period exceeds the best period indicated on the label does not mean that the product is no longer usable. But in this case, in order to guarantee the quality of the product, it is necessary to re-check the relevant properties of the Product. Ⅳ. Usage Reference It is recommended to prepare the coating solution according to the following steps. The equipment should be clean and dry. 1.Disperse the release agent in heptane, toluene or other aliphatic or aromatic solvents. It is recommended that the solid content after dilution is 2 - 10%. 2.Add a cross - linking agent. If an anchoring agent is required, add the anchoring agent. Stir until uniform. 3.Finally, slowly add the catalyst until uniform stirring is achieved. 4.Optional components include: light - release additives and heavy - release additives. 5.Use the filtered coating solution to uniformly coat the substrate through a suitable coating head, and then enter the oven for curing. The oven temperature is set at 100 - 160°C, and the residence time in the oven is several seconds to dozens of seconds. - [BX-SRA-901 Solvent-free silicone release agent](https://boxinmaterial.com/product/bx-sra-901-silicone-release-agent/): Ⅰ. Product Details Typical product characteristics Numeric value Appearance Colorless Active ingredient content, % 100 Viscosity(mPa.s @23°C) 280-350 mPa.s Density(25 °C) 0.97 g/cm³ Flash point(℃ ,closed Cup) 140 Note: The above data are typical values and for reference only, not guaranteed technical specifications. Actual product performance may vary slightly depending on production batches and testing conditions. Ⅱ. Packaging and Storage The product should be stored in its original airtight container at -20℃ to +30℃. The expiration date (used before "month-year" is clearly indicated on the label of each barrel. The fact that the storage period exceeds the best period indicated on the label does not mean that the product is no longer usable. But in this case, in order to guarantee the quality of the product, it is necessary to re-check the relevant properties of the Product. Ⅳ. Usage Reference The coating solution must be prepared in the following order: 1. Add high-peeling strength additives first in high-peeling force application; 2. Add BX-SRA-901 and stir slowly until the mixture is homogeneous; 3. Add cross-linking agent and stir evenly; 4. Finally, add catalyst slowly and stir evenly; 5. The filtered coating solution is evenly coated on the substrate by a suitable coating head, and then enters the oven for solidification, the oven temperature is set to 120~160℃, and the oven residence time is a few seconds to tens of seconds. - [BX-WAR-801 Wetting Agent](https://boxinmaterial.com/product/bx-war-801-wetting-agent/): Ⅰ. Product Details Index Physical and chemical properties Test method Appearance Colorless to light yellow transparent liquid Visual measurement PH 6.0-8.0 Precision PH paper Viscosity(25℃) 20~50mPa·s NDJ-8S Viscometer Note: [1] and [2] can be customized according to customer requirements. The above data are for reference only and are not guaranteed technical specifications. Ⅱ. Packaging and Storage This product is packed in 25L plastic drums or 200L plastic drums, or according to customer requirements. Please store at 5-35℃ and avoid direct heating. In case of fire and combustion, extinguish the fire according to the general petroleum products method. The shelf life is 12 months from the date of manufacture in unopened packaging at a temperature of 0-30℃. Ⅲ. Application range Herbicides, insecticides, fungicides, fertilizer micronutrient solution; Industrial paints, wood paints, architectural coatings; Ⅳ. How to use As pesticide additive, the recommended dosage is 0.01 ~0.05% of the total formula; As coating and ink substrate wetting, the addition amount is 0.1% ~0.9%; - [BX-OSA-702 Silicone Adhesive](https://boxinmaterial.com/product/bx-osa-702-silicone-resin/): Ⅰ. Product Details Category Index 7022 7025 7028 7029 Physicochemistry Index Appearance Colorless transparent viscous liquid Solid Content(150℃*2h), % 52-55 56-58 59-61 58-60 Viscosity(25℃), cp 5-11W 3-9W 3-12W 3-12W PH 7 7 7 7 Specific Gravity(25℃) 0.98 0.98 0.98 0.98 Bonding Properties After Vulcanization Initial Adhesion(Steel Ball Number,∠30) ≤16 14-23 14-23 14-24 Peel Strength - PET transparent film(g/25um) 200-300 400-600 ≥800 ≥900 Peel Strength - 1% wt color paste added(g/25um) 80-150 300-500 ≥700 ≥800 Holding Power(260℃*3h) No displacement Temperature Resistance(230℃*30min) No residue in hot peeling Note: Dispensing ratio, original glue: thinner: BPO=100/65/1.5-2.0, solvent removal at 90℃*2min, curing at 160℃*6min; Test conditions: 25℃， 55-65%RH, 38um PET film thickness, 20-25 um cured glue thickness. *Supplementary Explanations: 1. The consistent PH value (7) across all models indicates neutral properties, suitable for use with most substrates without causing chemical corrosion; 2. "W" in viscosity values represents 10,000 (e.g., 5-11W cp = 50,000-110,000 cp), indicating high-viscosity characteristics suitable for adhesive applications requiring good thixotropy; 3. Peel strength shows a clear increasing trend from 7022 to 7029, reflecting progressive improvement in bonding performance—7028 and 7029 are particularly suitable for scenarios requiring high adhesion (e.g., high-strength film laminating); 4. The excellent high-temperature resistance (230℃*30min and 260℃*3h) confirms applicability in high-temperature processing or service environments, such as automotive interior bonding or electronic component assembly. Ⅱ. Packaging and Storage This product is packed in clear ,dry 200kg drum and sealed. Stored at room temperature (0~35℃).The effective storage period is 6 months. (Overdue the storage, if the product meet the standard, it can still be used.) Avoid direct sunlight. Be storied and transported as dangerous goods. Ⅲ. Application range As pressure sensitive adhesive, it can be coated on PET, aluminum foil and other substrates with traditional high temperature tape coating equipment, to make pressure sensitive adhesive tape. It has good temperature resistance and chemical resistance. It can also be used in printed circuit board electroplating process shielding, SMT process, FPC, PCB board, sand blasting, painting, high temperature paint, sheliding the protected part during gold plating or electroplating, and electronic, electrical and other products insulation bandage fixed. Ⅳ. Instructions 1. Dosage of curing agent (peroxide can be used ,such as BPO or DPP, recommend with BPO) added may ranged from 1.5% to 2.5% of the glue depends on the substrate, coating equipment, curing period and required characteristics and other factors. To ensure better mixing of the curing agent and the glue, the curing agent needs to be completely dissolved in the solvent before thoroughly mixing with the glue. To avoid the impure particles of color paste or others, the dilution liquid should be filtered once using more than 250 mesh filter screen before coating on the machine. 2. Curing agent can be used to accelerate the curing speed or to apply at low temperatures, as well as improve the cohesion strength the adhesion property of the adhesive. The mixed peroxide dispersion liquid should be used up within 1-2 days. That is because peroxide will lose its activity quickly in the solvents. The sufficient dispersion of adhesive and peroxide in the mixing process is the necessary condition to ensure the consistency of the finished product. 3. 702 adhesive can be directly coated with traditional tape coating equipment. The adhesive can be further diluted with the compatible solvent such as toluene and xylene before coating. The advisable working liquid concentration is 35%. The concrete concentration is depending on your respective equipment and experience. When using the solvents, please ensure that it is good ventilated and comply with safety precautions and regulations of solvent suppliers. - [BX-OSA-701 Silicone adhesive](https://boxinmaterial.com/product/bx-osa-701-silicone-resin/): Ⅰ. Product Details Item Index Appearance Colorless or light yellow transparent liquid, opalescent light is allowed, no mechanical impurity Viscosity(25℃), cp 10000-80000 [1] Solid content (150℃, 2h), % 60±2 Density(25℃), g/cm³ 1.0±0.02 Note: [1] Viscosity can be customized according to customer requirements; the above data are for reference only and are not guaranteed technical specifications. *Supplementary Explanations: 1. "Opalescent light is allowed, no mechanical impurity" clarifies two key appearance requirements: faint iridescent/milky luster (normal for high-viscosity modified resin systems, e.g., silicone-modified epoxy or polyester) is acceptable, but visible solid particles (e.g., dust, undissolved impurities) are strictly prohibited—this ensures the product is suitable for high-quality coating or adhesive scenarios; 2. "Viscosity 10000-80000 cp (25℃)" belongs to ultra-high viscosity: the broad range (and customizability) allows adaptation to diverse application needs—lower end (10000-30000 cp) for thick-film brushing, higher end (50000-80000 cp) for vertical substrate coating (prevents sagging); 3. "Solid content (150℃, 2h) 60±2%" specifies the test condition (high temperature to fully volatilize solvents) and content range: 60% non-volatile components (resin, crosslinking agents) balance film-forming thickness and construction fluidity—avoids too-thin films (low solid content) or poor flow (high solid content); 4. "Density 1.0±0.02 g/cm³ (25℃)" is close to the density of water, indicating the product has good compatibility with water-based or low-density organic solvents—facilitating formulation adjustment (e.g., dilution ratio calculation) and ensuring uniform coating/adhesion on common substrates (metal, plastic, wood); 5. Combined with indicators, the product is likely a solvent-based ultra-high viscosity functional resin, applicable to scenarios like heavy-duty anticorrosive coatings, high-adhesion structural adhesives, or thick-film protective layers. Ⅱ. Packaging and Storage This product is packed in clear and dry 200KG or 1000L steel drum and sealed. Stored at room temperature (0~ 35℃). The effective storage period is 6 months.(Overdue the storage, if the product meet the standard, it can still be used.) Avoid direct sunlight. Be storied and transported as dangerous goods. Ⅲ. Instructions 1.This product is two components, can be cured with peroxide BPO or our special curing agent. 2.Due to the difference of the substrate, coating equipment, curing period and required characteristics and other factors, the addition of the curing agent is 1.5 ~ 2.5% of the glue. In order to ensure the better mixture of the curing agent and the adhesive, the curing agent needs to be completely dissolved in the solvent and then added to the glue solution and mixed well. At the same time, the dilution liquid should be filtered once using more than 180 mesh filter screen before coating on the machine, to prevent the mixing of mechanical impurities. 3.The curing agent can be used to accelerate the curing speed or allow the curing at low temperature, and it can also improve the cohesion strength of the adhesive and improve the adhesion property of the adhesive. The mixed dispersion liquid should be used up within 1-2 days. That is because peroxide will lose its activity quickly in the solvent. To ensure the consistency of the finished product, the sufficient dispersion of adhesive and peroxide in the mixing process is necessary. 4.The 701 series binder can be directly coated on the substrate with traditional tape coating equipment. You can further dilute the adhesive with compatible solvent such as toluene and xslene. The advisable working liquid concentration is 18~20% that can be determined according to their own equipment and experience. When using the solvents, please ensure that it is good ventilated and comply with safety precautions and regulations of solvent suppliers. 5.Surface curing period: 80-90%C *2min Eliminate the solvent to ensure that there is no solvent in the glue when it enters he solidification zone; 150 ~170C*5 min, heating curing process further improves the adhesive force, cohesive strength and' initial adhesion. But the exact conditions required for Vulcanization depend on the length, temperature and efficiency of the furnace, the type of curing agent and the type of substrate used. It must be tested on the device to determine the condition. 6.If temperature tolerance of the equipment and substrate is allowed, higher curing temperature can be used to shorten curing time. Compared to low temperature curing, raising the curing temperature can increase the cohesive strength of the adhesive in a shorter time. - [BX-MQR-605 Series Vinyl VMQ silicone resin](https://boxinmaterial.com/product/bx-mqr-605-series-vinyl-vmq-silicone-resin/): Ⅰ. Product Details Model 605 series methyl MQ silicone resin Index 605P 605S 605N Appearance White Powder Colorless Transparent Liquid Colorless transparent viscous liquid Viscosity(25℃) - 15-30S (4# cup) 30000-100000 cp [1] Solid content% ＞99 65±2 ＞99 M/Q value 0.5-3.0 [2] 0.5-3.0 [2] 0.5-3.0 [2] Note: 1. [1] (Viscosity of 605N: 30000-100000 cp) and [2] (M/Q value of all 605 series models: 0.5-3.0) can be customized according to customer requirements, enabling precise matching with diverse application performance needs; 2. Core technical interpretation: - M/Q value (0.5-3.0): This is a key differentiator from previous 601-604 series (0.6-0.9 range). The "M unit" is monofunctional siloxane (-Si(CH₃)₃), and the "Q unit" is tetrafunctional siloxane (-SiO₄/₂). A wider range means broader performance adjustability: - Low M/Q (0.5-0.8): Enhances heat resistance (up to 400-500℃) and cured film hardness, suitable for high-temperature protective coatings; - Medium M/Q (0.9-1.5): Balances flexibility and compatibility, ideal for blending with organic resins (e.g., epoxy, acrylic) for composite coatings; - High M/Q (1.6-3.0): Improves toughness and hydrophobicity, applicable to flexible substrates (e.g., plastic, rubber) or water-repellent finishes. - Viscosity of 605N (30000-100000 cp): Belongs to ultra-high viscosity, far higher than the "＞10000 cp" of previous N-type models. It is suitable for scenarios requiring no sagging (e.g., vertical thick-film coating of pipelines) or as a base material for high-adhesion sealants. 3. Application positioning by form: - 605P (white powder, ＞99% solid content): For solvent-free high-temperature curing systems (e.g., aerospace component coatings) to avoid volatile-induced defects; - 605S (colorless liquid, 15-30S viscosity, 65±2% solid content): For low-viscosity processes (e.g., electronic component impregnation, thin-film optical coatings) due to good fluidity; - 605N (ultra-high viscosity liquid, ＞99% solid content): For thick-film protection (e.g., heavy-duty equipment anticorrosion) or high-performance adhesives. Ⅱ. Packaging and Storage Packed in 25kg cardboard drums or 200kg lined plastic iron drums. Room temperature sealed storage, solution for half a year, powder and silicone oil type for one year. If the storage time exceeds the expiration date indicated on the label, it does not mean that the product cannot continue to be used. But in this case, retesting is necessary. Ⅲ. Instructions 1.Used as tackifier for silicone pressure-sensitive adhesive; 2.High temperature resistant coatings, used for insulation, bonding, sealing, etc. of Class H motors 3.Reinforcing additive in condensation silicone rubber, to enhance color, transparency and mechanical strength 4.Waterproof coatings in daily chemical industry, such as lipstick 5.It can be used as a raw material for making release agents; 6.Raw material for defoamer to improve defoaming and foam inhibition ability. - [BX-MQR-604 Series Methyl MQ silicone resin](https://boxinmaterial.com/product/bx-mqr-604-series-methyl-mq-silicone-resin/): Ⅰ. Product Details Model 604 series methyl MQ silicone resin Index 604P 604S 604N Appearance White Powder Colorless Transparent Liquid Colorless transparent viscous liquid Viscosity(25℃) - 15-30S (4# cup) ＞10000 cp [1] Solid content% ＞99 65±2 ＞99 M/Q value 0.6-0.9 [2] 0.6-0.9 [2] 0.6-0.9 [2] Note: 1. [1] (Viscosity parameter of 604N) and [2] (M/Q value for all 604 series models) are customizable based on customer requirements, allowing tailored performance for specific application scenarios; 2. Technical clarification: The "M/Q value" in methyl MQ silicone resin denotes the molar ratio of monofunctional siloxane (M units: -Si(CH₃)₃) to tetrafunctional siloxane (Q units: -SiO₄/₂). This ratio is critical—lower values (≈0.6) enhance thermal stability and cured hardness, while higher values (≈0.9) improve flexibility and compatibility with organic resins; 3. Product form applications: - 604P (white powder, ≥99% solid content): Ideal for solvent-free formulations, high-temperature curing systems, or as a reinforcing additive in composites (minimizes volatile emissions); - 604S (colorless liquid, 15-30S viscosity, 65±2% solids): Suited for low-viscosity processes like thin-film coating, electronic component impregnation, or spray applications (excellent flow and wetting properties); - 604N (viscous liquid, ＞10000cp, ≥99% solids): Designed for thick-film protective coatings or high-performance adhesives (prevents sagging on vertical surfaces and ensures minimal shrinkage during curing). Ⅱ. Packaging and Storage Packed in 25kg cardboard drums or 200kg lined plastic iron drums. Room temperature sealed storage, solution for half a year, powder and silicone oil type for one year. If the storage time exceeds the expiration date indicated on the label, it does not mean that the product cannot continue to be used. But in this case, retesting is necessary. Ⅲ. Instructions 1.Used as tackifier for silicone pressure-sensitive adhesive; 2.High temperature resistant coatings, used for insulation, bonding, sealing, etc. of Class H motors 3.Reinforcing additive in condensation silicone rubber, to enhance color, transparency and mechanical strength 4.Waterproof coatings in daily chemical industry, such as lipstick 5.It can be used as a raw material for making release agents; 6.Raw material for defoamer to improve defoaming and foam inhibition ability. - [BX-MQR-603 Series Methyl MQ silicone resin](https://boxinmaterial.com/product/bx-mqr-603-series-methyl-mq-silicone-resin/): Ⅰ. Product Details Model 603 series methyl MQ silicone resin Index 603P 603S 603N Appearance White Powder Colorless Transparent Liquid Colorless transparent viscous liquid Viscosity(25℃) - 15-30S (4# cup) ＞10000 cp [1] Solid content% ＞99 65±2 ＞99 M/Q value 0.6-0.9 [2] 0.6-0.9 [2] 0.6-0.9 [2] Note: 1. [1] (Viscosity of 603N) and [2] (M/Q value of all 603 series models) can be customized according to customer requirements, enabling adaptation to diverse scenario needs (e.g., adjusting M/Q value for higher flexibility or hardness); 2. Key technical interpretation: The "M/Q value" of methyl MQ silicone resin represents the molar ratio of monofunctional siloxane units (M units, chemical formula: -Si(CH₃)₃) to tetrafunctional siloxane units (Q units, chemical formula: -SiO₄/₂). A lower M/Q value (near 0.6) enhances the resin’s heat resistance and cured film hardness, while a higher M/Q value (near 0.9) improves compatibility with organic polymers and flexibility of the cured product; 3. Product application positioning by form: - 603P (white powder, solid content ＞99%): Suitable for solvent-free or high-concentration formulations, such as high-temperature-resistant coatings for metal parts or additives for composite materials (avoids solvent volatilization and ensures performance stability); - 603S (colorless transparent liquid, 15-30S viscosity, solid content 65±2%): Ideal for low-viscosity application scenarios, including impregnation of electronic components (to enhance insulation) and thin-film coatings (easy to spray/brush without sagging); - 603N (colorless transparent viscous liquid, ＞10000cp viscosity, solid content ＞99%): Designed for thick-film protective coatings (e.g., anti-scratch layers on surfaces) or high-adhesion adhesives, where high viscosity prevents run-off on vertical substrates and high solid content avoids film shrinkage during curing. Ⅱ. Packaging and Storage Packed in 25kg cardboard drums or 200kg lined plastic iron drums. Room temperature sealed storage, solution for half a year, powder and silicone oil type for one year. If the storage time exceeds the expiration date indicated on the label, it does not mean that the product cannot continue to be used. But in this case, retesting is necessary. Ⅲ. Instructions 1.Used as tackifier for silicone pressure-sensitive adhesive; 2.High temperature resistant coatings, used for insulation, bonding, sealing, etc. of Class H motors 3.Reinforcing additive in condensation silicone rubber, to enhance color, transparency and mechanical strength 4.Waterproof coatings in daily chemical industry, such as lipstick 5.It can be used as a raw material for making release agents; 6.Raw material for defoamer to improve defoaming and foam inhibition ability. - [BX-MQR-602 Series Methyl MQ silicone resin](https://boxinmaterial.com/product/bx-mqr-602-series-methyl-mq-silicone-resin/): Ⅰ. Product Details Model 602 series methyl MQ silicone resin Index 602P 602S 602N Appearance White Powder Colorless Transparent Liquid Colorless transparent viscous liquid Viscosity(25℃) - 15-30S (4# cup) ＞10000 cp [1] Solid content% ＞99 65±2 ＞99 M/Q value 0.6-0.9 [2] 0.6-0.9 [2] 0.6-0.9 [2] Note: 1. [1] (Viscosity of 602N) and [2] (M/Q value of all models) can be customized according to customer requirements to match specific application scenarios; 2. Key concept explanation: The "M/Q value" of methyl MQ silicone resin refers to the molar ratio of monofunctional siloxane units (M units, chemical structure: -Si(CH₃)₃) to tetrafunctional siloxane units (Q units, chemical structure: -SiO₄/₂). This ratio directly determines the resin’s core performance—lower M/Q values (closer to 0.6) enhance hardness and heat resistance, while higher M/Q values (closer to 0.9) improve flexibility and compatibility with organic resins; 3. Product form differentiation: - 602P (white powder, solid content ＞99%): Suitable for high-temperature curing systems (e.g., heat-resistant coatings for metal substrates) where solvent-free formulations or high-concentration blending is required; - 602S (colorless transparent liquid, 15-30S viscosity, solid content 65±2%): Ideal for low-viscosity application scenarios (e.g., impregnation of electronic components, thin-film coatings) due to its good fluidity and ease of spraying/coating; - 602N (colorless transparent viscous liquid, ＞10000cp viscosity, solid content ＞99%): Designed for thick-film coatings (e.g., protective layers for high-wear surfaces) or adhesive formulations, where high solid content avoids film shrinkage and high viscosity prevents run-off on vertical substrates. Ⅱ. Packaging and Storage Packed in 25kg cardboard drums or 200kg lined plastic iron drums. Room temperature sealed storage, solution for half a year, powder and silicone oil type for one year. If the storage time exceeds the expiration date indicated on the label, it does not mean that the product cannot continue to be used. But in this case, retesting is necessary. Ⅲ. Instructions 1.Used as tackifier for silicone pressure-sensitive adhesive; 2.High temperature resistant coatings, used for insulation, bonding, sealing, etc. of Class H motors 3.Reinforcing additive in condensation silicone rubber, to enhance color, transparency and mechanical strength 4.Waterproof coatings in daily chemical industry, such as lipstick 5.It can be used as a raw material for making release agents; 6.Raw material for defoamer to improve defoaming and foam inhibition ability. - [BX-MQR-601 Series Methyl MQ silicone resin](https://boxinmaterial.com/product/bx-mqr-601-series-methyl-mq-silicone-resin/): Ⅰ. Product Details Model 601 series methyl MQ silicone resin Index 601P 601S 601N Appearance White Powder Colorless Transparent Liquid Colorless transparent viscous liquid Viscosity(25℃) - 15-30S (4# cup) ＞10000 cp [1] Solid content% ＞99 65±2 ＞99 M/Q value 0.6-0.9 [2] 0.6-0.9 [2] 0.6-0.9 [2] Note: 1. [1] (Viscosity of 601N) and [2] (M/Q value of all models) can be customized according to customer requirements; 2. MQ silicone resin’s "M/Q value" refers to the molar ratio of monofunctional siloxane units (M units, e.g., -Si(CH₃)₃) to tetrafunctional siloxane units (Q units, e.g., -SiO₄/₂)—this ratio directly affects the resin’s hardness, flexibility, and compatibility with other materials; 3. The 601 series has three forms to adapt to different application scenarios: 601P (white powder, high solid content) for high-temperature curing systems; 601S (colorless transparent liquid, medium solid content) for low-viscosity coating/impregnation; 601N (colorless transparent viscous liquid, high solid content) for thick-film coating or adhesive formulations. Ⅱ. Packaging and Storage Packed in 25kg cardboard drums or 200kg lined plastic iron drums. Room temperature sealed storage, solution for half a year, powder and silicone oil type for one year. If the storage time exceeds the expiration date indicated on the label, it does not mean that the product cannot continue to be used. But in this case, retesting is necessary. Ⅲ. Instructions 1.Used as tackifier for silicone pressure-sensitive adhesive; 2.High temperature resistant coatings, used for insulation, bonding, sealing, etc. of Class H motors 3.Reinforcing additive in condensation silicone rubber, to enhance color, transparency and mechanical strength 4.Waterproof coatings in daily chemical industry, such as lipstick 5.It can be used as a raw material for making release agents; 6.Raw material for defoamer to improve defoaming and foam inhibition ability. - [BX-SRS-508 High activity organic silicone resin](https://boxinmaterial.com/product/bx-srs-508-high-activity-organic-silicone-resin/): Ⅰ. Product Details Item Index Appearance Colorless to light yellow transparent liquid, opalescent light is allowed Viscosity(4# Cup, 25℃), S 15-35 Solid content, % 50±1 Drying time, ≤ Surface dry 2h, actually dry 24h, 180℃ 1h Note: The above data are for reference only and are not guaranteed technical specifications. *Supplementary Explanations: 1. "Opalescent light is allowed" describes a faint iridescent or milky sheen that may occur in the liquid—this is a normal phenomenon in modified resin systems (e.g., silicone-modified acrylic, alkyd resins) and arises from subtle light scattering of resin molecules. It does not indicate turbidity, impurities, or quality degradation; 2. Viscosity (15-35S via 4# Cup at 25℃) falls into the medium viscosity range: it balances fluidity and film-forming stability—sufficiently thin for application methods like spraying (avoiding nozzle clogging) or brushing (reducing brush marks), while thick enough to prevent run-off on vertical substrates (ensuring uniform wet film thickness); 3. "Solid content 50±1%" means non-volatile components (resin, crosslinking agents, functional additives) account for half the total mass: this ratio balances environmental performance (lower VOC emissions than low-solid-content products) and construction efficiency (no need for multiple coats to reach target film thickness); 4. "Surface dry 2h" refers to the time when the liquid surface loses tackiness (can be touched without residue), enabling early handling or stacking; "actually dry 24h" is the time for complete curing at room temperature (meets basic mechanical performance); "180℃ 1h" is the heat-accelerated curing condition, suitable for industrial mass production to shorten the production cycle; 5. Combined with these indicators, the product is likely a solvent-based industrial coating resin, applicable to metal, plastic, or wood substrates requiring moderate application viscosity and flexible curing options. Ⅱ. Packaging and Storage This product is packed in 200 kg iron drum, stored in a cool and dry place, avoid direct sunlight, avoid acid and alkali contact. Storied and transported as dangerous goods. Ⅲ. Instructions 1.The diluent used in this product should not contain water, acid, alkali, amine and other compounds, otherwise it will affect adhesion, dryness and other properties of paint film. 2.This product contains toluene and other flammable and explosive solvents. Attention should be paid to enhancing site ventilation during processing. Pay attention to fire prevention, anti-static, strictly cut off fire sources. Operators should pay attention to labor protection. 3.This product can be diluted with ketones, esters, toluene, xylene, etc.. The shelf life is half a year. - [BX-SRS-507 Solvent free organic silicone resin](https://boxinmaterial.com/product/bx-srs-507-solvent-free-organic-silicone-resin/): Ⅰ. Product Details Item Index Appearance Colorless to light yellow liquid, opalescent light is allowed Viscosity(25℃), cp 200-800 Volatile matter% ≤3 Note: The above data are for reference only and are not guaranteed technical specifications. *Supplementary Explanations: 1. "Opalescent light is allowed" refers to a faint iridescent or milky luster that may appear in the liquid—this is a normal and acceptable characteristic in high-purity viscous systems (e.g., modified epoxy resins, polyester resins), caused by subtle light scattering of resin molecules, and does not indicate impurities or turbidity; 2. "cp" (centipoise) is a standard viscosity unit, and the range 200-800 cp represents medium viscosity: it is fluid enough for easy mixing with additives (e.g., pigments, curing agents) or application via methods like blade coating, while being viscous enough to avoid run-off on inclined substrates, ensuring uniform film formation; 3. "Volatile matter ≤3%" means the product contains extremely low levels of evaporable components (e.g., residual solvents, small-molecule monomers): this minimizes environmental emissions (low VOCs) during use and avoids defects in the final cured product (such as shrinkage, blistering, or pinholes) caused by volatile evaporation; 4. Combined with these indicators, the product is likely a low-volatile, medium-viscosity functional resin, suitable for scenarios requiring environmental friendliness and stable film performance (e.g., high-end coatings, electronic adhesives, or composite material binders). Ⅱ. Packaging and Storage This product is packed in 200 kg plastic drum, stored in a cool and dry place, avoid direct sunlight, avoid acid and alkali contact. This product belongs to non-dangerous goods. Ⅲ. Instructions 1.It is generally recommended to use the pigment filler and a part of the resin to prepare the paste, then add the remaining silicone resin to produce finished coating. You can also directly mix the resin-free color paste into the resin to adjust the finished paint. 2.Xylene and other solvents without hydroxyl group can be chosen as diluent. - [BX-SRS-506 Protective silicone resin](https://boxinmaterial.com/product/bx-srs-506-organic-silicone-resin/): Ⅰ. Product Details Item Index Appearance Colorless to light yellow transparent liquid, opalescent light is allowed Viscosity(4# Cup, 25℃), S 12-30 Solid content, % 50±1 Note: The above data are for reference only and are not guaranteed technical specifications. *Supplementary Explanations: 1. "Opalescent light is allowed" describes a faint iridescent or milky sheen that may occur in the liquid—this is a normal phenomenon in modified resin systems (e.g., silicone-modified acrylic, alkyd resins) and arises from subtle light scattering of resin molecules. It does not indicate impurities, turbidity, or quality degradation; 2. Viscosity (12-30S via 4# Cup at 25℃) falls into the medium viscosity range: compared to higher viscosity (e.g., 20-50S) variants, it has better fluidity, making it more suitable for application methods like high-pressure spraying (to avoid nozzle clogging) or coating on complex-shaped substrates. It also prevents excessive run-off when applied to vertical surfaces, ensuring uniform wet film thickness; 3. "Solid content 50±1%" means non-volatile components (resin, crosslinking agents, functional additives) account for half the total mass: this ratio balances environmental performance and film-forming efficiency—lower than low-solid-content products (e.g., 30% solid content) in volatile organic compound (VOC) emissions, and higher than high-solid-content products (e.g., 80% solid content) in application flexibility (no need for specialized high-viscosity coating equipment); 4. Combined with these indicators, the product is likely a solvent-based functional resin for scenarios like industrial coatings (metal, plastic substrates) or adhesive primers, where moderate viscosity and balanced solid content are required. Ⅱ. Packaging and Storage This product is packed in 200 kg iron drum, stored in a cool and dry place, avoid direct sunlight, avoid acid and alkali contact. Storied and transported as dangerous goods. Ⅲ. Instructions 1.The diluent used in this product should not contain water, acid, alkali, amine and other compounds, otherwise it will affect adhesion, dryness and other properties of paint film. 2.This product contains toluene and other flammable and explosive solvents. Attention should be paid to enhancing site ventilation during processing. Pay attention to fire prevention, anti-static, strictly cut off fire sources. Operators should pay attention to labor protection. 3.This product can be diluted with ketones, esters, toluene, xylene, etc.. The shelf life is half a year. - [BX-SRS-505 Electrical insulation silicone resin](https://boxinmaterial.com/product/bx-srs-505-organic-silicone-resin/): Ⅰ. Product Details Item Index Appearance Colorless to light yellow transparent liquid, opalescent light is allowed Viscosity(4# Cup, 25℃), S 20-50 Solid content, % 50±1 Note: The above data are for reference only and are not guaranteed technical specifications. *Supplementary Explanations: 1. "Opalescent light is allowed" refers to a faint iridescent or milky luster that may appear in the liquid—this is a normal and acceptable trait in modified resin systems (e.g., silicone-modified acrylic or epoxy resins), caused by subtle light scattering of resin molecules, and does not indicate impurities or quality issues; 2. Viscosity (20-50S via 4# Cup at 25℃) belongs to medium-to-high viscosity: this range balances two key needs—on one hand, it ensures sufficient fluidity for application methods like brushing, rolling, or low-pressure spraying; on the other hand, it avoids excessive run-off when coating vertical substrates, helping form uniform wet films; 3. "Solid content 50±1%" means non-volatile components (resin, functional additives, etc.) account for half the total mass: this ratio reduces volatile organic compound (VOC) emissions compared to low-solid-content products, while ensuring the cured film has enough thickness and performance (e.g., adhesion, wear resistance) without requiring multiple coats; 4. The combination of these indicators suggests the product is likely a solvent-based functional resin (e.g., for coatings, adhesives) suitable for scenarios requiring moderate application viscosity and balanced environmental performance. Ⅱ. Packaging and Storage This product is packed in 200 kg iron drum, stored in a cool and dry place, avoid direct sunlight, avoid acid and alkali contact. Storied and transported as dangerous goods. Ⅲ. Instructions 1.The diluent used in this product should not contain water, acid, alkali, amine and other compounds, otherwise it will affect adhesion, dryness and other properties of paint film. 2.This product contains toluene and other flammable and explosive solvents. Attention should be paid to enhancing site ventilation during processing. Pay attention to fire prevention, anti-static, strictly cut off fire sources. Operators should pay attention to labor protection. 3.This product can be diluted with ketones, esters, toluene, xylene, etc.. The shelf life is half a year. - [BX-SRS-504 Self-drying at room temperature silicone resin](https://boxinmaterial.com/product/bx-srs-504-self-drying-at-room-temperature-silicone-resin/): Ⅰ. Product Details Item Index Appearance Colorless to light yellow transparent liquid, opalescent light is allowed Viscosity(4# Cup, 25℃), S 20-60 Solid content, % 50±1 Drying time, ≤ Surface drying 2h, completely drying 24h, 180℃ 1h Heat resistance (Varnish: float type aluminum powder=4:1, 500±10℃, 3h) No peeling, no cracking, no blistering Note: The above data are for reference only and are not guaranteed technical specifications. *Corrections & Supplementary Explanations: 1. Corrected "Surface drying" to "Surface drying" (standard industrial terminology for the initial drying stage, referring to when the liquid surface loses tackiness and cannot be wiped off); 2. "Opalescent light is allowed" describes a faint iridescent or milky luster that may appear in the liquid—this is a normal phenomenon in modified resin systems (e.g., silicone-modified polyester or epoxy resins) and does not indicate impurities or quality degradation; 3. Viscosity range (20-60S via 4# Cup at 25℃) belongs to medium-to-high viscosity: compared with lower viscosity ranges, it is more suitable for scenarios requiring thicker wet films (e.g., brush coating on rough substrates) while still ensuring smooth application without obvious brush marks; 4. "Solid content 50±1%" means non-volatile components (resin, crosslinking agents, functional additives) account for half the total mass—this balance reduces volatile organic compound (VOC) emissions during construction and ensures the cured film has sufficient thickness and mechanical performance; 5. Drying time covers three application scenarios: room-temperature surface drying (2h, enabling early stacking or subsequent processing), room-temperature complete curing (24h, for small-batch or non-heat-resistant substrates), and heat-accelerated curing (180℃ for 1h, for industrial mass production to improve efficiency); 6. Heat resistance requirement (500±10℃ for 3h, no peeling/cracking/blistering) confirms the product is suitable for high-temperature environments, such as coatings for engine parts, high-temperature pipelines, or heat-resistant decorative panels. Ⅱ. Packaging and Storage This product is packed in 200 kg iron drum, stored in a cool and dry place, avoid direct sunlight, avoid acid and alkali contact. Storied and transported as dangerous goods. Ⅲ. Instructions 1.The diluent used in this product should not contain water, acid, alkali, amine and other compounds, otherwise it will affect adhesion, dryness and other properties of paint film. 2.This product contains toluene and other flammable and explosive solvents. Attention should be paid to enhancing site ventilation during processing. Pay attention to fire prevention, anti-static, strictly cut off fire sources. Operators should pay attention to labor protection. 3.This product can be diluted with ketones, esters, toluene, xylene, etc.. The shelf life is half a year. - [BX-SRS-503 Smokeless silicone resin](https://boxinmaterial.com/product/bx-srs-503-smokeless-silicone-resin/): Ⅰ. Product Details Item Index Appearance Colorless to light yellow transparent liquid, opalescent light is allowed Viscosity(4# Cup, 25℃), S 12-25 Solid content, % 50±1 Drying time, ≤ Surface drying 2h, completely drying 24h, 180℃ 1h Heat resistance (Varnish: float type aluminum powder=4:1, 500±10℃, 3h) No peeling, no cracking, no blistering Note: The above data are for reference only and are not guaranteed technical specifications. *Corrections & Supplementary Explanations: 1. Corrected "Surface drying" to "Surface drying" (standard terminology for drying stage description); 2. "Opalescent light is allowed" means the liquid may show a faint iridescent or milky sheen—this is a normal and acceptable characteristic in modified resin systems (e.g., silicone-modified acrylic resin) and does not indicate impurity or quality issues; 3. Viscosity (12-25S via 4# Cup at 25℃) represents medium viscosity, balancing easy application (e.g., brushing, rolling) and avoiding excessive fluidity that reduces film thickness; 4. "Solid content 50±1%" means non-volatile components (resin, functional additives) account for half the total mass, reducing solvent emissions while ensuring good film-forming continuity; 5. Drying time covers three scenarios: surface drying (2h, surface no longer tacky for initial handling), room-temperature complete drying (24h, full curing without heat), and heat-accelerated drying (180℃ for 1h, suitable for industrial efficient production); 6. Heat resistance requirement (500±10℃ for 3h, no defects) confirms the product is applicable to high-temperature environments (e.g., high-temperature equipment coatings, heat-resistant decorative layers). Ⅱ. Packaging and Storage This product is packed in 200 kg iron drum, stored in a cool and dry place, avoid direct sunlight, avoid acid and alkali contact. Storied and transported as dangerous goods. Ⅲ. Instructions 1.The diluent used in this product should not contain water, acid, alkali, amine and other compounds, otherwise it will affect adhesion, dryness and other properties of paint film. 2.This product contains toluene and other flammable and explosive solvents. Attention should be paid to enhancing site ventilation during processing. Pay attention to fire prevention, anti-static, strictly cut off fire sources. Operators should pay attention to labor protection. 3.This product can be diluted with ketones, esters, toluene, xylene, etc.. The shelf life is half a year. - [BX-SRS-502 Alcohol-soluble silicone resin](https://boxinmaterial.com/product/bx-srs-502-alcohol-soluble-silicone-resin/): Ⅰ. Product Details Item Index Appearance Colorless transparent liquid Viscosity(4# cup 25℃), S 10-18 Solid content, % 30±1 Drying time, ≤ Surface drying 0.5h, 150℃ 1h Note: The above data are for reference only and are not guaranteed technical specifications. *Supplementary explanations: 1. "Colorless transparent liquid" indicates high purity with no visible impurities or discoloration, typical for solvent-based coatings or resin solutions; 2. Viscosity measured by "4# cup" (a standard viscosity cup) at 25℃ with a range of 10-18 seconds indicates low-to-medium viscosity, suitable for easy application methods like spraying or brushing; 3. "Solid content 30±1%" means the non-volatile component (resin, pigments, etc.) accounts for about 30% of the total mass, with the remainder being volatile solvents—this balance ensures good flow during application and proper film formation after drying; 4. "Drying time" specifies both surface drying (0.5h, when the surface is no longer tacky) and complete curing under heat (150℃ for 1h), making it suitable for industrial processes requiring rapid handling and heat curing for performance enhancement. Ⅱ. Packaging and Storage This product is packed in 200 kg iron drum, stored in a cool and dry place, avoid direct sunlight, avoid acid and alkali contact. Storied and transported as dangerous goods. Ⅲ. Instructions 1.This product should avoid contact with acids, bases, organic salts and amines when used, otherwise it may accelerate curing, gelation and other phenomena occur, thus affcting the properties of products. 2.This product can be diluted with alcohol solvents such as methanol, ethanol, etc.. The surface of the substrate to be treated should be cleaned well with ethanol, gasoline or acetone. After solvent volatilization, curing can be accelerated by baking. - [BX-SRS-501 High temperature resistant silicone resin](https://boxinmaterial.com/product/bx-srs-501-high-temperature-resistant-silicone-resin/): Ⅰ. Product Details Item Index Appearance Colorless to light yellow liquid, opalescent light is allowed Viscosity(25℃), cp 1000-6000 Solid content, % ≥98 Refractive index(25℃) 1.4±0.02 Note: The above data are for reference only and are not guaranteed technical specifications. *Supplementary explanations: 1. "Opalescent light is allowed" refers to a faint iridescent or milky luster that may appear in the liquid—this is a normal phenomenon in high-purity viscous resin systems (e.g., modified epoxy or polyester resins) and does not indicate impurities; 2. "cp" (centipoise) is a standard viscosity unit, and the range 1000-6000 cp represents high viscosity, which is suitable for scenarios requiring thick film formation (e.g., adhesives, high-solid coatings) while still allowing controlled application (e.g., with specialized coating equipment); 3. "Solid content ≥98%" means the product has extremely low volatile components (e.g., residual solvents), which minimizes environmental emissions during use and avoids defects like film shrinkage or blistering caused by volatile evaporation; 4. The refractive index of 1.4±0.02 at 25℃ is a key physical indicator for identifying material purity and composition consistency—this range is typical for non-aromatic polymer resins (e.g., aliphatic polyesters) and helps verify whether the product matches the designed formula. Ⅱ. Packaging and Storage This product is packed in 50kg plastic drum, stored in a cool and dry place, avoid direct sunlight, avoid acid and alkali contact. This product belongs to non-dangerous goods. Ⅲ. Instructions 1.The diluent used in this product should not contain water, acid, alkali, amine and other compounds, otherwise it will affect adhesion, dryness and other properties of paint film. 2.This product can be diluted with ketones, esters, toluene, xylene, etc.. The shelf life is half a year. - [BX-ESR-408 Solid silicone resin](https://boxinmaterial.com/product/bx-esr-408-organic-silicone-resin/): Ⅰ. Product Details Item Index Test method Appearance Colorless to light yellow transparent solid GB1721 Softening point(℃) 60-100 GB/T12007.6-1989 Volatile matter% ≤3 GB/T 6284-2016 (or GB/T 1725-2007) - Gravimetric method for volatile matter in solids Solubility in toluene(1:1) Clear and transparent Visual observation method (GB/T 17529.1-1998 or industrial solubility test protocol) Note: The above data are for reference only and are not guaranteed technical specifications. *Supplementary explanations: 1. For "Volatile matter%", the recommended test methods are Chinese National Standards: GB/T 6284-2016 (Determination of moisture and volatile matter in chemical products) or GB/T 1725-2007 (Determination of non-volatile matter content of paints, varnishes and plastics)—both use the gravimetric principle (heating the sample at a specified temperature to measure mass loss, calculating volatile matter content); 2. A volatile matter content of ≤3% indicates the solid resin has minimal evaporable components (e.g., residual solvents, small-molecule monomers), which avoids defects like shrinkage or bubbling during processing (e.g., melting, curing) and ensures stable product performance; 3. The softening point range of 60-100℃ provides moderate thermal plasticity—suitable for scenarios like hot-melt processing (low-temperature melting) or high-temperature use (resisting softening at ambient temperatures); 4. "Solubility in toluene (1:1)" (clear and transparent) confirms good compatibility with aromatic solvents, facilitating applications such as solvent-based coating formulation. Ⅱ. Recommend applications 1 Used in the powder coating industry, improving heat resistance and weather resistance. Has less impact on the recoating properties than other solid silicone resin; 2 Used in heat-resistant industrial coatings, usually it can be added directly by means of compounding. The effect of different adding ratios on temperature resistance is the more critical, and the generally recommended introduced amount should be ≥15%(calculated by effective solid content). More balanced performance would further provide if introduced by means of polymerization grafting. 3 Used in weather-resistant polysiloxane coatings, combined with organic silicone resin, giving the coating weatherability and salt spray resistance. It meets the standards of HG/T 4755-2014 polysiloxane coatings Ⅲ. Packaging and Storage Generally be packed in 50kg plastic inner lining paper drums, sealed stored in a cool and dry environment under 25℃. The shelf life is generally 12 months from the date of production. Ⅳ. Instructions When this product is compounded used, it can be added directly or dissolved in solvent and then added to organic resin to prepare coating; when it is grafting modified used, the reaction process should be tested by glass test method to ensure entirely grafting. When used as powder coating, it can be carried out according to the general powder coating operation process. - [BX-ESR-406/407 Methyl solid silicone resin](https://boxinmaterial.com/product/bx-esr-406-407-organic-silicone-resin/): Ⅰ. Product Details Item Index Test method Appearance Colorless to light yellow transparent solid GB1721 Viscous matter content, % ≤3 Refer to industrial solid resin impurity test method (e.g., solvent extraction-filtering method) Softening point(℃) 60-100 GB/T12007.6-1989 Solubility in toluene(1:1) Clear and transparent Visual observation method (GB/T 17529.1-1998 or industrial solubility test protocol) Note: The above data are for reference only and are not guaranteed technical specifications. *Supplementary notes: 1. "Viscosity matter %" is standardized to "Viscous matter content, %" to accurately describe insoluble viscous impurities in solid resins; 2. Test methods for items without specified standards are supplemented: viscous matter content is typically determined by solvent extraction and filtering, while solubility in toluene follows visual inspection protocols (mixing 1:1 ratio by mass/volume and observing clarity); 3. The softening point range of 60-100℃ is expanded from the previous 60-90℃, indicating broader processing adaptability—suitable for both low-temperature melting and higher-temperature stability requirements; 4. GB standards referenced are Chinese national standards for material performance testing, ensuring consistency in measurement methods. Ⅱ. Recommend applications 1.Used in the powder coating industry, improving heat resistance and weather resistance. Has less impact on the recoating properties than other solid silicone resin; 2.Used in heat-resistant industrial coatings, usually it can be added directly by means of compounding. The effect of different adding ratios on temperature resistance is the more critical, and the generally recommended introduced amount should be ≥15%(calculated by effective solid content). More balanced performance would further provide if introduced by means of polymerization grafting. 3.Used in weather-resistant polysiloxane coatings, combined with organic silicone resin, giving the coating weatherability and salt spray resistance. It meets the standards of HG/T 4755-2014 polysiloxane coatings. Ⅲ. Packaging and Storage Generally be packed in 5Okg plastic inner lining paper drums, sealed stored in a cool and dry environment under 25℃C. The shelf life is generally 6 months from the date of production. Ⅳ. Instructions When this product is compounded used, it can be added directly or dissolved in solvent and then added to organic resin to prepare coating; when it is grafting modified used, the reaction process should be tested by glass test method to ensure entirely grafting. When used as powder coating, it can be carried out according to the general powder coating operation process - [BX-ESR-405 Powder Coating Silicone Resin](https://boxinmaterial.com/product/bx-esr-405-organic-silicone-resin/): Ⅰ. Product Details Item Index Test method Appearance Colorless to light yellow transparent solid GB1721 Viscous matter content, % ≤3 Refer to industrial solid resin impurity test method (e.g., solvent extraction-filtering method) Softening point(℃) 60-90 GB/T12007.6-1989 Solubility in toluene(1:1) Clear and transparent Visual observation method (GB/T 17529.1-1998 or industrial solubility test protocol) Note: The above data are for reference only and are not guaranteed technical specifications. *Corrections & supplements: 1. "Viscosity matter %" is revised to "Viscous matter content, %" (standard terminology for solid impurities in solid resins); 2. Filled in missing test methods: For "Viscous matter content", the common industrial method (solvent extraction-filtering to separate and quantify insoluble viscous impurities) is recommended; for "Solubility in toluene", it is aligned with GB/T 17529.1-1998 (Plastics - Determination of solubility) or general industrial visual solubility testing (mixing 1 part sample with 1 part toluene by mass/volume, stirring to dissolve, and observing clarity); 3. GB1721 is the Chinese National Standard for "Determination of Appearance and Transparency of Paints, Varnishes and Thinners" (adaptable for solid resin appearance inspection); GB/T12007.6-1989 is "Plastics - Polyurethane resins - Determination of softening point" (applicable to solid resin softening point testing); 4. A softening point of 60-90℃ indicates the solid resin has moderate thermal plasticity, facilitating melting processing or dissolution in solvents for subsequent use. Ⅱ. Recommend applications 1.Used in the powder coating industry, improving heat resistance and weather resistance. Has less impact on the recoating properties than other solid silicone resin; 2.Used in heat-resistant industrial coatings, usually it can be added directly by means of compounding. The effect of different adding ratios on temperature resistance is the more critical, and the generally recommended introduced amount should be ≥15%(calculated by effective solid content). More balanced performance would further provide if introduced by means of polymerization grafting. 3.Used in weather-resistant polysiloxane coatings, combined with organic silicone resin, giveing the coating weatherability and salt spray resistance. It meets the standards of HG/T 4755-2014 polysiloxane coatings Ⅲ. Packaging and Storage Generally be packed in 5Okg plastic inner lining paper drums, sealed stored in a cool and dry environment under 25℃ . The shelf life is generally 12 months from the date of production. Ⅳ. Instructions When this product is compounded used, it can be added directly or dissolved in solvent and then added to organic resin to prepare coating; when it is grafting modified used, the reaction process should be tested by glass test method to ensure entirely grafting. When used as powder coating, it can be carried out according to the general powder coating operation process. - [BX-ESR-404 High solid methylphenyl silicone resin](https://boxinmaterial.com/product/bx-esr-404-organic-silicone-resin/): Ⅰ. Product Details Item Index Appearance Colorless to light yellow liquid, opalescent light is allowed Viscosity(25℃), cp 80-500 Volatile matter% ≤5 Note: The above data are for reference only and are not guaranteed technical specifications. *Supplementary Notes: 1. "Opalescent light is allowed" describes a faint, iridescent, or milky luster that may occur in the liquid. This is a normal and acceptable characteristic in many modified resin systems (e.g., silicone-modified acrylic resins) and does not signify contamination or quality issues; 2. "cp" (centipoise) is a standard unit for measuring viscosity. A range of 80-500 cp indicates a medium-viscosity liquid—this viscosity balance ensures easy operation (such as mixing with additives, brushing, or spraying) while preventing excessive fluidity that might reduce film thickness after application; 3. "Volatile matter ≤5%" means the product contains very low levels of evaporable components (e.g., organic solvents, small-molecule monomers). This low volatility not only reduces environmental pollution during use but also avoids defects like film shrinkage, blistering, or pinholes caused by the evaporation of volatile substances during curing, ensuring the stability of the final product's performance. Ⅱ. Packaging and Storage This product is packed in 200 kg iron drum, stored in a cool and dry place, avoid direct sunlight, avoid acid and alkali contact. This product belongs to non-dangerous goods. Ⅲ. Instructions 1.The diluent used in this product shall not contain water, acid, alkali, amine and other compounds, otherwise it will affect adhesion, dryness and other properties of paint film. 2.Methanol and other flammable and explosive solvents may generate during using, attention should be paid to enhancing site ventilation during processing. Pay attention to fire prevention, anti-static, strictly cut off fire sources. Operators should pay attention to labor protection. 3.This product can be diluted with ketones, esters, toluene, xylene, etc.. The shelf life is half a year. - [BX-ESR-403 Methylphenyl polysiloxane resin](https://boxinmaterial.com/product/bx-esr-403-organic-silicone-resin/): Ⅰ. Product Details Item Index Appearance Colorless to light yellow liquid, opalescent light is allowed Viscosity(25℃), cp 80-500 Volatile matter% ≤5 Note: The above data are for reference only and are not guaranteed technical specifications. *Supplementary explanations: 1. "Opalescent light is allowed" means the liquid may exhibit a faint iridescent or milky sheen—this is a common acceptable trait in modified resins (e.g., acrylic or silicone-modified systems) and does not indicate impurity; 2. "cp" (centipoise) is a standard viscosity unit, and the range 80-500 cp represents a medium viscosity, balancing ease of handling (e.g., mixing, coating) and subsequent film-forming thickness; 3. "Volatile matter ≤5%" indicates the product has extremely low content of evaporable components (e.g., solvents, small-molecule monomers), which reduces environmental emissions during use and ensures stable performance of the final cured product (avoiding defects like shrinkage or blistering caused by volatile evaporation). Ⅱ. Packaging and Storage This product is packed in 200 kg plastic drum, stored in a cool and dry place, avoid direct sunlight, avoid acid and alkali contact. This product belongs to non-dangerous goods Ⅲ. Instructions 1.It is generally recommended to use the pigment filler and a part of the resin to prepare the paste, then add the remaining silicone resin to produce finished paint. You can also mix the resin-free color paste into the resin to adjust finished paint. 2. Xylene and other solvents not containing hydroxyl can be chosen as diluent. - [BX-ESR-402 Solvent-free silicone resin](https://boxinmaterial.com/product/bx-esr-402-organic-silicone-resin/): Ⅰ. Product Details Item Index Appearance Colorless to light yellow liquid, opalescent light is allowed Viscosity(25℃), cp 20-200 Flash point(℃) ≥65 Alkoxy content, wt% 30% Note: The above data are for reference only and are not guaranteed technical specifications. *Supplementary explanations: 1. "Opalescent light is allowed" refers to a faint iridescent or milky luster that may appear in the liquid, a common acceptable characteristic in modified resin (e.g., silicone resin) systems; 2. "cp" (centipoise) is a standard viscosity unit, and 20-200 cp indicates a low-to-medium viscosity, facilitating mixing and construction; 3. A flash point of ≥65℃ means the material belongs to "combustible liquids" (not easy to ignite under normal temperature), which is relatively safe for storage and use; 4. Alkoxy content (30 wt%) is a key indicator for alkoxy-functional resins (e.g., alkoxysilane-modified resins), which is closely related to the crosslinking reactivity and film-forming performance of the product. Ⅱ. Packaging and Storage This product is packed in 200 kg plastic drum, stored in a cool and dry place, avoid direct sunlight, avoid acid and alkali contact. This product belongs to non-dangerous goods. Ⅲ. Instructions 1.The diluent used in this product shall not contain water, acid, alkali, amine and other compounds, otherwise it will affect adhesion, dryness and other properties of paint film. 2.Methanol and other flammable and explosive solvents may generate during using, attention should be paid to enhancing site ventilation during processing. Pay attention to fire prevention, anti-statie, strictly cut off fire sources. Operators should pay attention to labor protection. 3.This product can be diluted with ketones, esters, toluene, xylene, etc.. The shelf life is half a year. - [BX-ESR-401 Multifunctional silicone resin](https://boxinmaterial.com/product/bx-esr-401-organic-silicone-resin/): Ⅰ. Product Details Item Index Appearance Colorless to light yellow liquid, opalescent light is allowed Viscosity(25℃), cp 400-1200 Solid content, % 80±2 Note: The above data are for reference only and are not guaranteed technical specifications. *Supplement: 1. "Opalescent light is allowed" means the liquid may show a faint iridescent or milky sheen (a common acceptable phenomenon in resin systems); 2. "cp" (centipoise) is a standard unit for viscosity, and the range 400-1200 cp indicates a medium-to-high viscosity liquid; 3. The 80±2% solid content is relatively high, which is typical for concentrated resin products (reducing solvent content and facilitating subsequent processing). Ⅱ. Packaging and Storage This product is packed in 200 kg iron drum, stored in a cool and dry place, avoid direct sunlight, avoid acid and alkali contact. Storied and transported as dangerous goods. Ⅲ. Instructions 1.The diluent used in this product should not contain water, acid, alkali, amine and other compounds, otherwise it will affect adhesion, dryness and other properties of paint film. 2.This product contains toluene and other flammable and explosive solvents. Attention should be paid to enhancing site ventilation during processing. Pay attention to fire prevention, anti-static, strictly cut off fire sources. Operators should pay attention to labor protection. 3.This product can be diluted with ketones, esters, toluene, xylene, etc.. The shelf life is half a year. - [BX-SRE-305 Methyl MQ silicone resin emulsion](https://boxinmaterial.com/product/bx-sre-305-silicone-resin-emulsion/): Ⅰ. Product Details Item Index Test method Appearance Milky white liquid GB1721 Viscosity(25℃), cp ≥5000 GB1723 Solid content(150℃, 2h), % 60±2 GB1725 Stability(3000r, 30min) Stable, non-stratified Refer to industrial emulsion stability test protocol (e.g., centrifugal stability method) Note: The above data are for reference only and are not guaranteed technical specifications. *Corrections & supplements: 1. "Mike white" is revised to "Milky white" (standard industrial description for opaque white liquid); 2. The original "Test method" for stability was filled with index content, so it is adjusted to a common industrial test method (centrifugal stability test, 3000r/min for 30min) to match the test item; 3. GB1721 (paint appearance), GB1723 (coating viscosity), and GB1725 (coating solid content) are all Chinese National Standards for coating performance testing; 4. "cp" (centipoise) is a common unit for measuring liquid viscosity, suitable for high-viscosity systems ≥5000 cp. Ⅱ. Packaging and Storage Generally 200KG, 50KG plastic bucker packaging; Stored sealed in a cool and dry environment at 5~36℃. Shelf life is generally 6 months from the date of production. Ⅲ. Instructions This product is 60% emulsion, and users can prepare appropriate concentration according to their own needs. Generally, dilute it to 1~10%, spray or brush it onto the mold surface, and then apply it again after one to five cycles. To obtain better effect, it is necessary to leave a layer of silicone film after the water has evaporated from the surface of the mold. The amount depends on the shape and size of the mold. The initial amount is S grams of 60% emulsion per 1000 square centimeters. - [BX-SRE-304 Methyl phenyl silicone resin emulsion](https://boxinmaterial.com/product/bx-sre-304-silicone-resin-emulsion/): Ⅰ. Product Details Item Index Test method Appearance Milky white liquid GB1721 Viscosity(4#cup, S) 15-40 GB1723 Solid content(150℃, 2h), % 50±2 GB1725 Note: The above data are for reference only and are not guaranteed technical specifications. *Supplement: 1. "Mike white" is corrected to "Milky white" (standard terminology for opaque white liquid appearance, consistent with industrial material description habits); 2. Referenced GB standards are Chinese National Standards for coating-related performance testing: GB1721 is for "Determination of Appearance and Transparency of Paints, Varnishes and Thinners", GB1723 is for "Determination of Viscosity of Paints and Varnishes", and GB1725 is for "Determination of Non-Volatile Matter Content of Paints, Varnishes and Plastics". Ⅱ. Recommend applications 1,Suitable for industrial heat resistant applications, such as boiler, heat source pipeline, electric heater and burning furnace etc. 2, Suitable for ovens and other heat-resistant cooking equipment. Ⅲ. Packaging and Storage Generally 200KG, 50KG plastic bucker packaging; Stored sealed in a cool and dry environment at 5~36℃. Shelf life is generally 6 months from the date of production. Ⅳ. Instructions It is suggested to prepare water - based resin - free color paste, and then combine it with resin emulsion together. Resin emulsion has better room temperature self-drying property, it can give the workpiece early protection and transport performance. But if you want to get good heat resistance and physical and mechanical properties, it is recommended to cure at 200- 280℃ for 15-60min. - [BX-SRE-303 Epoxy modified methyl phenyl silicone emulsion](https://boxinmaterial.com/product/bx-sre-303-silicone-resin-emulsion/): Ⅰ. Product Details Item Index Test method Appearance Milky white liquid GB1721 Viscosity(4#cup, S) 25-40 GB1723 Solid content(150℃, 2h), % 50±2 GB1725 Epoxy value (Effective solid content) 0.06-0.16 GB/T1677-2008 Note: The above data are for reference only and are not guaranteed technical specifications. *Corrections & supplements: 1. "Mike white" is revised to "Milky white" (standard description for opaque white liquid appearance); 2. "Expoxy value" is corrected to "Epoxy value" (standard terminology for resin performance indicators); 3. Referenced GB/GB/T standards are Chinese National Standards, where GB1721 specifies paint appearance testing, GB1723 specifies coating viscosity testing, GB1725 specifies coating solid content testing, and GB/T1677-2008 specifies epoxy value testing methods for epoxy resins. Ⅱ. Recommend applications It can be used in industrial heat resistant paint applications, suitable for the industry requiring salt spray resistance, such as ship steam pipeline etc. Ⅲ. Packaging and Storage Generally 200KG, 50KG plastic bucker packaging; Stored sealed in a cool and dry environment at 5~36℃. Shelf life is generally 6 months from the date of production. Ⅳ. Instructions It is suggested to prepare water - based resin -free color paste, and then use it with resin emulsion together. When compounding with organic resins (such as water Sexual polyamide curing agent), it is necessary to screen the compatibility of the two components, especially in varnish application. Resin emulsion has better room temperature self-drying property, it can give the workpiece early protection and transport performance. But if you want to get good heat resistance and physical and mechanical properties, it is recommended to cure at 200- 280℃ for 15-60min,for example, 250℃ for 30 minutes or 280℃ for 15 minutes. - [BX-SRE-302 Acrylic modified methyl phenyl silicone emulsion](https://boxinmaterial.com/product/bx-sre-302-silicone-resin-emulsion/): Ⅰ. Product Details Item Index Test method Appearance Milky white liquid GB1721 Viscosity(4#cup, S) 25-40 GB1723 Solid content(150℃, 2h), % 50±2 GB1725 Note: The above data are for reference only and are not guaranteed technical specifications. *Supplement: "Mike white" is corrected to "Milky white" (standard terminology for opaque white liquid appearance); the referenced GB standards are Chinese National Standards for coating performance testing (GB1721 for paint appearance, GB1723 for viscosity, GB1725 for solid content). Ⅱ. Recommend applications It can be used in industrial heat resistant paint applications, suitable for decorative occasions with higher requirements, to meet the temperature resistance performance at the same time, and has a relatively good film surface gloss and fullness. Ⅲ. Packaging and Storage Generally 200KG, 50KG plastic bucker packaging; Stored sealed in a cool and dry environment at 5~36℃. Shelf life is generally 6 months from the date of production. Ⅳ. Instructions It is suggested to prepare water- based resin - free color paste, and then combine it with resin emulsion together. Resin emulsion has better room temperature self - drying property, it can give the workpiece early protection and transport performance. But if you want to get good heat resistance and physical and mechanical properties, it is recommended to cure at 200-280℃ for 15-60min.Low temperature curing properties of coatings can be achieved by using water-based polyurethane or amino curing agent. - [BX-SRE-301 Methyl silicone resin emulsion](https://boxinmaterial.com/product/bx-sre-301-silicone-resin-emulsion/): Ⅰ. Product Details Item Index Test method Appearance Milky white liquid GB1721 Viscosity(4#cup, S) 15-40 GB1723 Solid content(150℃, 2h), % 50±2 GB1725 Note: The above data are for reference only and are not guaranteed technical specifications. *Note: Corrected "Mike white" to "Milky white" (common terminology for liquid appearance); GB standards referenced are Chinese national standards for coating performance testing. Ⅱ. Recommend applications 1.Suitable for industrial heat resistant applications, such as boiler, heat source pipeline, electric heater and burning furnace etc. 2.Suitable for ovens and other heat-resistant cooking equipment. Ⅲ. Packaging and Storage Generally 200KG, 50KG plastic bucker packaging; Stored sealed in a cool and dry environment at 5~36℃. Shelf life is generally 6 months from the date of production.. Ⅳ. Instructions It is suggested to prepare water - based resin -free color paste, and then use it with resin emulsion together. When compounding with organic resins (such as water Sexual polyamide curing agent), it is necessary to screen the compatibility of the two components, especially in varnish application. Resin emulsion has better room temperature self- drying property, it can give the workpiece early protection and transport performance. But if you want to get good heat resistance and physical and mechanical properties, it is recommended to cure at 200-280℃ for 15-60min,for example, 250℃ for 30 minutes or 280℃ for 15 minutes. - [BX-PSR-218 High temperature silicone resin](https://boxinmaterial.com/product/bx-psr-218-high-temperature-silicone-resin/): Ⅰ. Product Details Item Index Appearance Colorless to light yellow transparent liquid, opalescence is permitted Solid content, % 80 ± 1 Viscosity(4#cup, 25℃, S) ≥2000 Drying time, ≤ Surface drying 2h, drying by heating, 180℃ 2h Heat resistance (Varnish: float type aluminum powder =4:1, 500±10℃， 3h) No peeling, no cracking, no blistering Note: The above data are for reference only and are not guaranteed technical specifications. Ⅱ. Packaging and Storage This product is packed in 200kg iron drum, stored in a cool and dry place, avoid direct sunlight, avoid acid and alkali contact. Storied and transported as dangerous goods. Ⅲ. Instructions 1.The diluent used in this product should not contain water, acid, alkali, amine and other compounds, otherwise it will affect adhesion, dryness and other properties of paint film. 2.This product contains toluene and other flammable and explosive solvents. Attention should be paid to enhancing site ventilation during processing. Pay attention to fire prevention, anti-static, strictly cut off fire sources. Operators should pay attention to labor protection. 3.This product can be diluted with ketones, esters, toluene, xylene, etc.. The shelf life is half a year. - [BX-PSR-217 High temperature silicone resin](https://boxinmaterial.com/product/bx-psr-217-high-temperature-silicone-resin/): Ⅰ. Product Details Item Index Appearance Colorless to light yellow transparent liquid, opalescence is permitted Solid content, % 70 ± 1 Viscosity(4#cup, 25℃, S) ≥600 Drying time, ≤ Surface drying 2h, drying by heating, 180℃ 2h Heat resistance (Varnish: float type aluminum powder =4:1, 500±10℃， 3h) No peeling, no cracking, no blistering Note: The above data are for reference only and are not guaranteed technical specifications. Ⅱ. Packaging and Storage This product is packed in 200kg iron drum, stored in a cool and dry place, avoid direct sunlight, avoid acid and alkali contact. Storied and transported as dangerous goods. Ⅲ. Instructions 1.The diluent used in this product should not contain water, acid, alkali, amine and other compounds, otherwise it will affect adhesion, dryness and other properties of paint film. 2.This product contains toluene and other flammable and explosive solvents. Attention should be paid to enhancing site ventilation during processing. Pay attention to fire prevention, anti-static, strictly cut off fire sources. Operators should pay attention to labor protection. 3.This product can be diluted with ketones, esters, toluene, xylene, etc.. The shelf life is half a year. - [BX-PSR-216 High temperature silicone resin](https://boxinmaterial.com/product/bx-psr-216-high-temperature-silicone-resin/): Ⅰ. Product Details Item Index Appearance Colorless to light yellow transparent liquid, opalescence is permitted Solid content, % 60 ± 1 Viscosity(4#cup, 25℃, S) ≥500 Drying time, ≤ Surface drying 2h, drying by heating, 180℃ 2h Note: The above data are for reference only and are not guaranteed technical specifications. Ⅱ. Packaging and Storage This product is packed in 200kg iron drum, stored in a cool and dry place, avoid direct sunlight, avoid acid and alkali contact. Storied and transported as dangerous goods. Ⅲ. Instructions 1.The diluent used in this product should not contain water, acid, alkali, amine and other compounds, otherwise it will affect adhesion, dryness and other properties of paint film. 2.This product contains toluene and other flammable and explosive solvents. Attention should be paid to enhancing site ventilation during processing. Pay attention to fire prevention, anti-static, strictly cut off fire sources. Operators should pay attention to labor protection. 3.This product can be diluted with ketones, esters, toluene, xylene, etc.. The shelf life is half a year. - [BX-PSR-215 Organosilicon intermediate](https://boxinmaterial.com/product/bx-psr-215-organosilicon-intermediate/): Ⅰ. Product Details Item Index Appearance Colorless to light yellow transparent liquid, opalescence is permitted Solid content, % 60 ± 1 Viscosity(4#cup, 25℃, S) 10-15 Acid value, mgKOH/g ≤10 Hydroxy content， % 3-5 Note: The above data are for reference only and are not guaranteed technical specifications. Ⅱ. Packaging and Storage This product is packed in 200kg iron drum, stored in a cool and dry place, avoid direct sunlight, avoid acid and alkali contact. Storied and transported as dangerous goods. Ⅲ. Instructions 1.The diluent used in this product should not contain water, acid, alkali, amine and other compounds, otherwise it will affect adhesion, dryness and other properties of paint film. 2.This product contains toluene and other flammable and explosive solvents. Attention should be paid to enhancing site ventilation during processing. Pay attention to fire prevention, anti-static, strictly cut off fire sources. Operators should pay attention to labor protection. 3.This product can be diluted with ketones, esters, toluene, xylene, etc.. The shelf life is half a year. - [BX-PSR-214 Organic silicone insulating resin](https://boxinmaterial.com/product/bx-psr-214-organic-silicone-insulating-resin/): Ⅰ. Product Details Item Index Appearance Colorless to light yellow transparent liquid, opalescence is permitted Solid content, % 50 ± 1 Viscosity(4#cup, 25℃, S) 20-150 Note: The above data are for reference only and are not guaranteed technical specifications. Ⅱ. Packaging and Storage This product is packed in 200kg iron drum, stored in a cool and dry place, avoid direct sunlight, avoid acid and alkali contact. Storied and transported as dangerous goods. Ⅲ. Instructions 1.The diluent used in this product should not contain water, acid, alkali, amine and other compounds, otherwise it will affect adhesion, dryness and other properties of paint film. 2.This product contains toluene and other flammable and explosive solvents. Attention should be paid to enhancing site ventilation during processing. Pay attention to fire prevention, anti-static, strictly cut off fire sources. Operators should pay attention to labor protection. 3.This product can be diluted with ketones, esters, toluene, xylene, etc.. The shelf life is half a year. - [BX-PSR-213 Non-stick organic silicone resin](https://boxinmaterial.com/product/bx-psr-213-non-stick-organic-silicone-resin/): Ⅰ. Product Details Item Index Appearance Light yellow transparent liquid, opalescence is permitted Solid content, % 55 ± 1 Viscosity(4#cup, 25℃, S) 800-2800 Drying time, ≤ 250℃ 0.5h Note: The above data are for reference only and are not guaranteed technical specifications. Ⅱ. Packaging and Storage This product is packed in 200kg iron drum, stored in a cool and dry place, avoid direct sunlight, avoid acid and alkali contact. Storied and transported as dangerous goods. Ⅲ. Instructions 1.The diluent used in this product should not contain water, acid, alkali, amine and other compounds, otherwise it will affect adhesion, dryness and other properties of paint film. 2.This product contains toluene and other flammable and explosive solvents. Attention should be paid to enhancing site ventilation during processing. Pay attention to fire prevention, anti-static, strictly cut off fire sources. Operators should pay attention to labor protection. 3.This product can be diluted with ketones, esters, toluene, xylene, etc.. The shelf life is half a year. - [BX-PSR-212 Polyester modified organic silicone resin](https://boxinmaterial.com/product/bx-psr-212-polyester-modified-organic-silicone-resin/): Ⅰ. Product Details Item Index Appearance Light yellow transparent liquid, opalescence is permitted Solid content, % 50 ± 1 Viscosity(4#cup, 25℃, S) 20-90 Drying time, ≤ 250℃ 0.5h Note: The above data are for reference only and are not guaranteed technical specifications. Ⅱ. Packaging and Storage This product is packed in 200kg iron drum, stored in a cool and dry place, avoid direct sunlight, avoid acid and alkali contact. Storied and transported as dangerous goods. Ⅲ. Instructions 1.The diluent used in this product should not contain water, acid, alkali, amine and other compounds, otherwise it will affect adhesion, dryness and other properties of paint film. 2.This product contains toluene and other flammable and explosive solvents. Attention should be paid to enhancing site ventilation during processing. Pay attention to fire prevention, anti-static, strictly cut off fire sources. Operators should pay attention to labor protection. 3.This product can be diluted with ketones, esters, toluene, xylene, etc.. The shelf life is half a year. - [BX-PSR-211 Self-drying silicone resin](https://boxinmaterial.com/product/bx-psr-211-self-drying-silicone-resin/): Ⅰ. Product Details Item Index Appearance Colorless to light yellow transparent liquid, opalescence is permitted Solid content, % 50 ± 1 Viscosity(4#cup, 25℃, S) 30-150 Drying time, ≤ Surface dry 2h, 180℃ 2h Heat resistance (Varnish: float type aluminum powder=4:1, 200-600±10℃, 3h) No peeling, no cracking, no blistering Note: The above data are for reference only and are not guaranteed technical specifications. Ⅱ. Packaging and Storage This product is packed in 200kg iron drum, stored in a cool and dry place, avoid direct sunlight, avoid acid and alkali contact. Storied and transported as dangerous goods. Ⅲ. Instructions 1.The diluent used in this product should not contain water, acid, alkali, amine and other compounds, otherwise it will affect adhesion, dryness and other properties of paint film. 2.This product contains toluene and other flammable and explosive solvents. Attention should be paid to enhancing site ventilation during processing. Pay attention to fire prevention, anti-static, strictly cut off fire sources. Operators should pay attention to labor protection. 3.This product can be diluted with ketones, esters, toluene, xylene, etc.. The shelf life is half a year. - [BX-PSR-210 High temperature self-drying silicone resin](https://boxinmaterial.com/product/bx-psr-210-high-temperature-self-drying-silicone-resin/): Ⅰ. Product Details Item Index Appearance Colorless to light yellow transparent liquid, opalescence is permitted Solid content, % 50 ± 1 Viscosity(4#cup, 25℃, S) 15-40 Drying time, ≤ Surface dry 2h, 180℃ 2h Heat resistance (Varnish: float type aluminum powder=4:1, 200-600±10℃， 3h) No peeling, no cracking, no blistering Note: The above data are for reference only and are not guaranteed technical specifications. Ⅱ. Packaging and Storage This product is packed in 200kg iron drum, stored in a cool and dry place, avoid direct sunlight, avoid acid and alkali contact. Storied and transported as dangerous goods. Ⅲ. Instructions 1.The diluent used in this product should not contain water, acid, alkali, amine and other compounds, otherwise it will affect adhesion, dryness and other properties of paint film. 2.This product contains toluene and other flammable and explosive solvents. Attention should be paid to enhancing site ventilation during processing. Pay attention to fire prevention, anti-static, strictly cut off fire sources. Operators should pay attention to labor protection. 3.This product can be diluted with ketones, esters, toluene, xylene, etc.. The shelf life is half a year. - [BX-PSR-209 Insulating resin](https://boxinmaterial.com/product/bx-psr-209-organic-silicone-resin/): Ⅰ. Product Details Item Index Appearance Colorless to light yellow transparent liquid, opalescence is permitted Solid content, % 50 ± 1 Viscosity(4#cup, 25℃, S) 12-30 Note: The above data are for reference only and are not guaranteed technical specifications. Ⅱ. Packaging and Storage This product is packed in 200kg iron drum, stored in a cool and dry place, avoid direct sunlight, avoid acid and alkali contact. Storied and transported as dangerous goods. Ⅲ. Instructions 1.The diluent used in this product should not contain water, acid, alkali, amine and other compounds, otherwise it will affect adhesion, dryness and other properties of paint film. 2.This product contains toluene and other flammable and explosive solvents. Attention should be paid to enhancing site ventilation during processing. Pay attention to fire prevention, anti-static, strictly cut off fire sources. Operators should pay attention to labor protection. 3.This product can be diluted with ketones, esters, toluene, xylene, etc.. The shelf life is half a year. - [BX-PSR-208 Acrylic Modified silicone resin](https://boxinmaterial.com/product/bx-psr-208-acrylic-modified-silicone-resin/): Ⅰ. Product Details Item Index Appearance Colorless to light yellow transparent liquid, opalescence is permitted Solid content, % 50 ± 1 Viscosity(4#cup, 25℃, S) ≥30 Drying time, ≤ Surface dry 2h, 180℃ 1h Heat resistance (Varnish: float type aluminum powder=4:1, 200-600±10℃， 3h) No peeling, no cracking, no blistering Note: The above data are for reference only and are not guaranteed technical specifications. Ⅱ. Packaging and Storage This product is packed in 200kg iron drum, stored in a cool and dry place, avoid direct sunlight, avoid acid and alkali contact. Storied and transported as dangerous goods. Ⅲ. Instructions 1.The diluent used in this product should not contain water, acid, alkali, amine and other compounds, otherwise it will affect adhesion, dryness and other properties of paint film. 2.This product contains toluene and other flammable and explosive solvents. Attention should be paid to enhancing site ventilation during processing. Pay attention to fire prevention, anti-static, strictly cut off fire sources. Operators should pay attention to labor protection. 3.This product can be diluted with ketones, esters, toluene, xylene, etc.. The shelf life is half a year. - [BX-PSR-207 Acrylic Acid Modified Organic silicone resin](https://boxinmaterial.com/product/bx-psr-207-acrylic-acid-modified-organic-silicone-resin/): Ⅰ. Product Details Type BX-PSR-207 series acrylic acid modified silicone resin 207/1 207/2 207/3 207/4 207/5 Appearance Colorless to light yellow transparent liquid, opalescence is permitted Solid content, % 50 ± 1 Viscosity(4#cup, 25℃, S) ＞120 ＞100 ＞80 ＞60 20-60 Drying time, ≤ Surface drying 0.5h, drying by heating 180℃ 0.5h Surface drying 1h, drying by heating 180℃ 1h Heat resistance (Varnish: float type aluminum powder=4:1, 200-600±10℃， 3h) No peeling, no cracking, no blistering Note: The above data are for reference only and are not guaranteed technical specifications. Ⅱ. Packaging and Storage This product is packed in 200kg iron drum, stored in a cool and dry place, avoid direct sunlight, avoid acid and alkali contact. Storied and transported as dangerous goods. Ⅲ. Instructions 1.It can be cured at room temperature with two components, combined with isocyanate curing agent such as Bayer 3390, N75, etc.. ,the addition amount is 10- 20% of the total resin. 2.High temperature curing, heating up to 180℃ for one hour curing. It can also cooperate with amino resin to shorten curing time. 3.This product contains toluene, xylene and other flammable and explosive solvents Attention should be paid to enhancing site ventilation during processing. Pay attention to fire prevention, anti-static, strictly cut off fire sources. Operators should pay attention to labor protection. - [BX-PSR-206 Epoxy-modified silicone resin](https://boxinmaterial.com/product/bx-psr-206-epoxy-modified-silicone-resin/): Ⅰ. Product Details Item Index Appearance Colorless to light yellow transparent liquid, opalescence is permitted Solid content, % 50 ± 1 Viscosity(4#cup, 25℃, S) 20-90 Drying time, ≤ 150℃ 2h Note: The above data are for reference only and are not guaranteed technical specifications. Ⅱ. Packaging and Storage This product is packed in 200kg iron drum, stored in a cool and dry place, avoid direct sunlight, avoid acid and alkali contact. Storied and transported as dangerous goods. Ⅲ. Instructions 1.The diluent used in this product should not contain water, acid, alkali, amine and other compounds, otherwise it will affect adhesion, dryness and other properties of paint film. 2.This product contains toluene and other flammable and explosive solvents. Attention should be paid to enhancing site ventilation during processing. Pay attention to fire prevention, anti-static, strictly cut off fire sources. Operators should pay attention to labor protection. 3.This product can be diluted with ketones, esters, toluene, xylene, etc.. The shelf life is half a year. - [BX-PSR-205 Epoxy-modified silicone resin](https://boxinmaterial.com/product/bx-psr-205-epoxy-modified-silicone-resin/): Ⅰ. Product Details Type BX-PSR-205 series epoxy modified silicone resin 205/1 205/2 Appearance Colorless to light yellow transparent liquid, opalescence is permitted Solid content, % 50 ± 1 Viscosity(4#cup, 25℃, S) 30-80 20-60 Epoxy value 0.06-0.16 0.02-0.07 Drying time, ≤ Surface drying 2h, drying by heating, 180℃ 1h Heat resistance (Varnish: float type aluminum powder =4:1, 400±10℃， 3h) No peeling, no cracking, no blistering Note: The above data are for reference only and are not guaranteed technical specifications. Ⅱ. Packaging and Storage This product is packed in 200kg iron drum, stored in a cool and dry place, avoid direct sunlight, avoid acid and alkali contact. Storied and transported as dangerous goods. Ⅲ. Instructions 1.Cured at room temperature with two components, combined with isocyanate curing agent such as Bayer 3390, N75, etc.. ,the addition amount is 10 ~ 20% of the total resin. 2.High temperature curing, heating up to 180℃ for one hour curing. It can also cooperate with amino resin to shorten curing time. 3.The diluent used in this product should not contain water, acid, alkali, amine and other compounds, otherwise it will affect adhesion, dryness and other properties of paint film. 4.This product contains xylene and other flammable and explosive solvents. Attention should be paid to enhancing site ventilation during processing. Pay attention to fire prevention, anti-static, strictly cut off fire sources. Operators should pay attention to labor protection. - [BX-PSR-204 Self-drying silicone resin](https://boxinmaterial.com/product/bx-psr-204-self-drying-silicone-resin/): Ⅰ. Product Details Item Index Appearance Colorless to light yellow transparent liquid, opalescence is permitted Solid content, % 50 ± 1 Viscosity(4#cup, 25℃, S) 15~50 Drying time, ≤ Surface drying 2h, completely drying, 180℃ 1h Heat resistance (Varnish: float type aluminum powder =4:1, 500±10℃， 3h) No peeling, no cracking, no blistering Note: The above data are for reference only and are not guaranteed technical specifications. Ⅱ. Packaging and Storage This product is packed in 200kg iron drum, stored in a cool and dry place, avoid direct sunlight, avoid acid and alkali contact. Storied and transported as dangerous goods. Ⅲ. Instructions 1.The diluent used for this product should not contain water, acid, alkali, amine and other compounds, otherwise it will affect adhesion, dryness and other properties of paint film. 2.This product may contain toluene and other flammable and explosive solvents. Attention should be paid to enhancing site ventilation during processing. Pay attention to fire prevention, anti-static, strictly cut off fire sources. Operators should pay attention to labor protection. 3.This product can be diluted with ketones, esters, toluene, xylene, etc.. The shelf life is half a year. - [BX-PSR-203 Organic silicone Resin](https://boxinmaterial.com/product/bx-psr-203-organic-silicone-resin/): Ⅰ. Product Details Item Index Appearance Colorless to light yellow transparent liquid, opalescence is permitted Solid content, % 50 ± 1 Drying Time (200℃, Copper Sheet, h) ≤2 Viscosity(4#cup, 25℃, S) 15-50 Heat Resistance(200℃), h ≥300   Breakdown Strength (KV/mm) Normal (20±5, ℃) ≥55 High temperature (200±2, ℃) ≥30 Become Damp (20±5 ℃, 95±3% RH, after 24h) ≥35 Volume Resistance (Ω . cm) Normal (20±5, ℃) ≥1018 High temperature (200±2, ℃) ≥1011 Become Damp (20±5 ℃, 95±3% RH, after 24h) ≥1012 Note: The above data are for reference only and are not guaranteed technical specifications.   Ⅱ. Packaging and Storage This product is packed in 200kg iron drum, stored in a cool and dry place, avoid direct sunlight, avoid acid and alkali contact. Storied and transported as dangerous goods. Ⅲ. Instructions 1.The diluent used for this product should not contain water, acid, alkali, amine and other compounds, otherwise it will affect adhesion, dryness and other properties of paint film. 2.This product may contain toluene and other flammable and explosive solvents. Attention should be paid to enhancing site ventilation during processing. Pay attention to fire prevention, anti-static, strictly cut off fire sources. Operators should pay attention to labor protection. 3.This product can be diluted with ketones, esters, toluene, xylene, etc.. The shelf life is half a year. - [BX-PSR-202 Organic silicone Resin](https://boxinmaterial.com/product/high-temperature-resistant-silicone-resin/): Ⅰ. Product Details Item Index Appearance Colorless to light yellow transparent liquid, opalescence is permitted Solid content, % 50 ± 1 Viscosity(4#cup, 25℃, S) 20~50 Note: The above data are for reference only and are not guaranteed technical specifications.   Ⅱ. Packaging and Storage This product is packed in 200kg iron drum, stored in a cool and dry place, avoid direct sunlight, avoid acid and alkali contact. Storied and transported as dangerous goods. Ⅲ. Instructions 1.The diluent used for this product should not contain water, acid, alkali, amine and other compounds, otherwise it will affect adhesion, dryness and other properties of paint film. 2.This product may contain toluene and other flammable and explosive solvents. Attention should be paid to enhancing site ventilation during processing. Pay attention to fire prevention, anti-static, strictly cut off fire sources. Operators should pay attention to labor protection. 3.This product can be diluted with ketones, esters, toluene, xylene, etc.. The shelf life is half a year. - [BX-PSR-201 Organic silicone Resin](https://boxinmaterial.com/product/bx-psr-201-organic-silicone-resin/): Ⅰ. Product Details Item Index Appearance Colorless to light yellow transparent liquid, opalescence is permitted Solid content, % 50 ± 1 Viscosity(4#cup, 25℃, S) 20~50 Note: The above data are for reference only and are not guaranteed technical specifications. Ⅱ. Packaging and Storage This product is packed in 200kg iron drum, stored in a cool and dry place, avoid direct sunlight, avoid acid and alkali contact. Storied and transported as dangerous goods. Ⅲ. Instructions 1.The diluent used for this product should not contain water, acid, alkali, amine and other compounds, otherwise it will affect adhesion, dryness and other properties of paint film. 2.This product may contain toluene and other flammable and explosive solvents. Attention should be paid to enhancing site ventilation during processing. Pay attention to fire prevention, anti-static, strictly cut off fire sources. Operators should pay attention to labor protection. 3.This product can be diluted with ketones, esters, toluene, xylene, etc.. The shelf life is half a year. - [BX-MSR-103 Organic silicone Resin](https://boxinmaterial.com/product/bx-msr-103-organic-silicone-resin/): Ⅰ. Product Details Item Index Appearance Colorless to light yellow liquid, no mechanical impurity Solid content, % 50 ± 1 Viscosity(4#cup, 25℃, S) 12~20 Note: The above data are for reference only and are not guaranteed technical specifications. Ⅱ. Packaging and Storage This product is packed in 200kg iron drum, stored in a cool and dry place, avoid direct sunlight, avoid acid and alkali contact. Storied and transported as dangerous goods. Ⅲ. Instructions 1.The diluent used in this product should not contain water, acid, alkali, amine and other compounds, otherwise it will affect adhesion, dryness and other properties of paint film. 2.This product contains toluene and other flammable and explosive solvents. Attention should be paid to enhancing site ventilation during processing. Pay attention to fire prevention, anti-static, strictly cut off fire sources. Operators should pay attention to labor protection. 3.This product can be diluted with ketones, esters, toluene, xylene, etc..  The shelf life is half a year. - [BX-MSR-102 Organic silicone Resin](https://boxinmaterial.com/product/bx-msr-102-organic-silicone-resin/): Ⅰ. Product Details Item Index Appearance Colorless to light yellow liquid, no mechanical impurity Solid content, % 50 ± 1 Gel time (200℃) min 10-30 Viscosity(4#cup, 25℃, S) 11~20 Note: The above data are for reference only and are not guaranteed technical specifications. Ⅱ. Packaging and Storage This product is packed in 200kg iron drum, stored in a cool and dry place, avoid direct sunlight, avoid acid and alkali contact. Storied and transported as dangerous goods. Ⅲ. Instructions 1.The diluent used in this product should not contain water, acid, alkali, amine and other compounds, otherwise it will affect adhesion, dryness and other properties of paint film. 2.This product contains toluene and other flammable and explosive solvents. Attention should be paid to enhancing site ventilation during processing. Pay attention to fire prevention,anti-static, strictly cut off fire sources. Operators should pay attention to labor protection. 3.This product can be diluted with ketones, esters, toluene, xylene, etc.. The shelf life is half a year. - [BX-MSR-101 Organic silicone Resin](https://boxinmaterial.com/product/bx-msr-101-organic-silicone-resin/): Ⅰ. Product Details Item Index Appearance Colorless to light yellow semitransparent liquid Solid content, % 50 ± 1 Viscosity(4#cup, 25℃, S) 11~20 Note: The above data are for reference only and are not guaranteed technical specifications. Ⅱ. Packaging and Storage This product is packed in 200kg iron drum, stored in a cool and dry place, avoid direct sunlight, avoid acid and alkali contact. Storied and transported as dangerous goods. Ⅲ. Instructions 1.This product should be used without contacting with acids, bases, organic salts and amines, otherwise accelerated curing, gelation and other phenomena would occur, then affect the product performance. 2.This product contains toluene and other flammable and explosive solvents. Attention should be paid to enhancing site ventilation during processing. Pay attention to fire eention, anti-static, strictly cut off fire sources. Operators should pay attention to labor protection. 3.This product can be diluted with alcohols solvent such as methanol, ethanol and benzenes such as toluene, xylene and so on. The shelf life is half a year. [comment]: # (Generated by Hostinger Tools Plugin)